Radiant Electricals

We deal in good quality HT Cable with the most superior standards and performance available

Features:

• Less power consumption
• High Accuracy
• Longer working life
• High Stability
• Reliable and Powerful
• Economical

• High tensile strength
• Good conductivity
• Ability to withstand harsh conditions

Features:

• Less power consumption
• High Accuracy
• Longer working life
• High Stability
• Reliable and Powerful
• Economical

• Good Quality
• High conductivity
• Various National and international approved standards are followed 
• High Conductivity
• Low Losses

• These cables are used for flexible use for medium mechanical stresses with Free Movement without tensile stress in dry & moist condition for measuring and control cables in tool machines, conveyor belts, production lines in machinery production and in steel production

• Conductor: Annealed Bare Copper as per IS 8130, Class 5
• Insulation PVC: Type A conforming to IS 5831
• Sheath Colour: Black / Grey
• PVC Sheath: Type ST-1 conforming to IS 5831.HR, FR and FRLS sheathing can be provided as per requirement.
• Core Colors: Black with white numbering + Green / Yellow (earth core)
• Rated Voltage: 300/500 V
• Test Voltage: 2000 V A.C
• Min. Bending Radius: Flexing 7.5 x the overall dia.of cable
• Fixed Installation: 4 x the overall dia. of cable 105 C
• Max Short Circuit Temperature: 160 C
• Minimum Laying Temperature: Up to -15O C

• These are flat sheathed cables. They are used mainly as trailing cables for crane installations, floor conveyer systems and shelf control units

• Good Quality
• High conductivity
• Various National and international approved standards are followed 
• High Conductivity
• Low Losses

• High Flexibility
• Water Resit ant PVC for underwater applications

• Conductor: Compactly bunched, electrolytic grade, annealed copper with superb flexibility according to harmonized grades HO5 V-K and HO7 V-K available in various sizes from 0.5 sq. mm to 300 sq. mm. Unifilar conductor will be provided on special order from 1 to 4 sq. mm
• Insulation: Generally available with Standard PVC insulation and PVC sheathing. Choice of insulation and sheathing is available against specific need
• Standard Sheath Colours: Grey & Black

• 100 mtr. Coils. Longer lengths supplied on order

• Conductor -Annealed copper wires according to class 1 or 2 or 5 of BS EN 60228
• Insulation -XLPE according to BS EN 50290-2-29
• Pairs -Twisted
• Identification pairs -Blue & White. Blue cores indicate pair identification
• Individual screen -Aluminium/polyster tape 0.024 mm in electrical contact with tinned annealed copper wires of a total section of 0.5 mm² polyester tape 0.023 mm
• Assembly -Concentric layers
• Overall screen -Aluminium/polyster tape 0.024 mm in electrical contact with tinned annealed copper wires of a total section of 0.5 mm² polyester tape 0.023 mm
• Bedding ( If applicable ) -PVC type TM 51 according to BS EN 50290-2-22
• Armour ( if applicable ) -Galvanized steel wire
• Cable sheath -PVC type TM51 according to BS EN 50290-2-22
• Marking -RR KABEL - n x m x a 300/500 V GEN TO PAS 5308 P1

Applicable Standards:

• BS 5308 - 1 Design guidelines
• IEC 60332 - 1 Flame retardant
• IEC 60332-3C Fire retardant on bunched cables (if applicable)
• Bending Radius - For Type I-12D & Type II-14D

• Is suitable for interconnection of electrical measuring devices to Instrument panel or instrument. Measuring, monitoring and control in machine tool manufacturing, in plant engineering, in all places where electrical interference fields can distort a signal transmission or where Interference pulses arising in the mains must be confined

• Special PVC data cables, adapted to DIN VDE 0245
• The material used in manufacture is cadmium free and contains no silicone and free of substances harmful to the wetting properties of Lacquers

• Coupling Resistance: < 250 ohm
• Temperature Range: Flexing -5 C to + 80 C
• Nominal Voltage: Uo / 500 V
• Test Voltage: 3000 V.
• Insulation Resistance: Min. 20 Mo hm x km
• Mutual Capacitance: According to different cross sections Core / Core approx, 150 NF / km. Core / Screen approx, 270 NF / km
• Minimum Bending Radius: Approx. 10 x cable

• Bare copper, fine wire conductors, bunch 0 0 Fixed Installation -20 C to +80 C stranded to IS 8130 class 5 and IEC 60228 class 5. Core insulation of special PVC Type A IS 5831, TI 1 DIN VDE 0207 Part 4. Co loured cores up to 4 cores only. Continuous numbering in white and one green / yellow core from 5 core onwards. Cores stranded in layers with optimal lay-length. Core Wrapping with-copper mylar tape. Tinned copper braided screen, Approx. 85% coverage. Special PVC outer sheath TYPE ST1 of IS 5831, TM2 DIN VDE 0281 Part 1 and HD 21.1, sheath color Grey. Extensively Oil Resistant, Chemical Resistant. PVC self- extinguishing and flame retardant, test according to IS 694, DINVDE 0472 Part 804 and IEC 60332-1

• PVC double insulated cable,for welding machines
• Used to conduct secondary voltage in secondary side connection to MMA welding powers sources
• Stranded, red copper conductor wire

• Super find strands of plain
• Copper with single elastomeric PVC insulation